Skip to content
Lead flashing fitted around a brick chimney above exposed roof battens

Chimney Repairs in Peterborough

Chimney repointing, rebuilding and flashing repairs.

Damaged mortar, loose brickwork and leaking flashing can all require chimney repairs. The appropriate work depends on the condition of the stack and its roof junction.

We carry out chimney repointing and rebuilding, flaunching and pot replacement, and lead flashing repairs.

Signs you might need this

  • Mortar missing or washing out of the joints
  • Plants growing from the top of the stack
  • Damp on the chimney breast inside
  • Cracked flaunching around the pots
  • Lead flashing lifting, split or missing

What the work covers

  • Chimney repointing
  • Partial and full chimney rebuilds
  • Flaunching and pot replacement
  • Lead flashing and soakers
  • Taking down redundant stacks where appropriate

Considering solar panels? We can check whether the roof is in a suitable condition first and coordinate the roofing side with the installation. See our solar service.

Photographs supplied by Heritage, grouped by the work shown. Select an image to view the full photograph.
Terracotta chimney pot with a metal cowl above a brick chimney stack.
Chimney pot and cowl

Questions about chimney repairs

Does the chimney need repointing or rebuilding?

That depends on the condition of the bricks, mortar and stack. An inspection is needed before recommending the work.

Can a chimney cause damp indoors?

Damp can have several causes, including faults around the chimney and roof junction. Contact us to arrange an inspection.

Independent ratings

  1. 5.0 from 71 ratings

  2. Top 3 roofing contractors in Peterborough, score 4.8

  3. #2 of 13 Peterborough roofers, top 15%

Arrange a free roof survey

Tell us what you have noticed. We will look at the roof, explain what we find and give you a written, no-obligation quotation.

Planning chimney repairs

Why can a chimney leak continue after repointing?

The entry route may involve flashings, top weathering or adjoining coverings rather than mortar joints alone.

What separates flashing work from chimney masonry work?

Flashings weather the roof junction; masonry work addresses the stack. Both may be needed, but they are different components of the scope.

Can a redundant chimney simply be removed?

Not without assessing structure, adjoining properties and any permissions. Removal is a separate proposal, not a default repair.

Should chimney repairs consider the neighbouring roof?

Yes where the stack or junction is shared. Ownership, access and the adjoining covering need checking.

Can chimney work be coordinated with replacement roofing?

Yes. Agree the masonry and leadwork sequence before renewing the surrounding covering to avoid unnecessary disturbance.

What information helps with a chimney-area damp report?

Describe where damp appears, when it happens and any earlier repairs. Safe photographs help, but the entry point still needs investigation.

Have another question? Contact Heritage to discuss your property.